It consists of a cylindrical chamber, a, ending
in a narrower tube, c, which forms the seating for a flap valve, d, to
which the hammer or clapper, e, is fixed. Steam is admitted through a
small pipe, b, at the bottom, and after a certain interval attains
sufficient pressure to lift the valve. The opening being large compared
with the pipe, b, steam escapes more rapidly than it arrives through the
small orifice; the pressure falls, and the valve drops down and causes the
hammer to strike a bell surrounding the cylinder. The valve is provided
with an internal collar as shown, so that it has to rise for the width of
this before the steam is let out, and thus determines the swing of the
clapper and the force of the blow. To intensify the latter and multiply
the number of blows, the clapper spring is prolonged over the fulcrum and
bent back so as to form a spring, which is tightened by the lifting of the
flap, and sends the clapper down on the bell with increased force. The
hinge of the flap does not require any lubrication besides what it gets
through the steam. The bell is fixed upon the roof of the driver's cab, so
that the steam does not interfere with his lookout, and fastened by three
bolts or screws.
Pages:
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129