long;
and it is also claimed for it that it is simpler and less costly, weighs
less, and is more correct in its action than the ordinary link motion; the
friction is less, the working parts are simplified, it takes less oil,
and is well under the driver's eye. It also allows larger cylinders to be
got in between the frames of inside cylinder engines, as, the slide valves
may be placed on the top or bottom of the cylinders. This latter advantage
is a great one, as, with the ordinary link motion, large cylinders are
exceedingly difficult to design so as to get the requisite clear exhaust.
The action of the gear is as follows: A rod, a, is fixed by a pin at b, on
which it is free to turn, and is attached to a rod, c, at d, the other end
of which link is fastened to the connecting rod at e. At the point, f, in
this rod another lever, g, is connected to it, the upper end of which is
coupled to the valve rod, h, at i, and just below this point a second
connection is made to a block at j, sliding in a short curved piece, k.
The inclination of the block, k, governs the travel of the valve. The
total weight of the engine in working order is: On the leading wheels, 10
tons 8 cwt.
Pages:
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86