But by far the
boldest innovation on existing practice is the new class of compound
locomotives now being introduced by Mr. Webb. It is a six wheel engine,
with leading wheels 4 ft. diameter, and two pairs of drivers, 6 ft. 6 in.
diameter. The trailing drivers are driven by a pair of outside cylinders,
18 in. diameter and 24 in. stroke; and the leading drivers by a single
low-pressure cylinder--which takes the exhaust steam from the
high-pressure cylinders--of 26 in. diameter and 24 in. stroke, placed
under the center of the smoke-box. The boiler is the same as that in the
standard type of engine, but the wheel base is 17 ft. 7 in., and in order
to allow it to traverse curves easily, the front axle is fitted with a
radial axle-box, which is in one casting from journal to journal, and
fitted at each end with brass steps for the bearings; the box is radial,
struck from the center of the rigid wheel base, and the horn plates are
curved to suit the box, the lateral motion being controlled by strong
springs. Another peculiarity of this engine is that, instead of the
ordinary link motion, it is fitted with Joy's valve gear, which is now
being more and more adopted. This gear--which is of a most ingenious
decription--dispenses altogether with eccentrics, and so allows the inside
bearings to be much increased, those on these engines being 131/2 in.
Pages:
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85